From Hentschel
Line 2: | Line 2: | ||
sudo apt-get install nut | sudo apt-get install nut | ||
* configure nut, link with instructions https://wiki.ipfire.org/addons/nut/detailed | * configure nut, link with instructions https://wiki.ipfire.org/addons/nut/detailed | ||
− | + | * configuration files in ''/etc/nut'' | |
+ | ** configure UPS type in ''nut.conf'' | ||
+ | <pre> | ||
+ | MODE=standalone | ||
+ | </pre> | ||
** configure ''ups.conf'' | ** configure ''ups.conf'' | ||
<pre> | <pre> | ||
Line 13: | Line 17: | ||
** configure the UPS daemon via ''upsd.conf'' | ** configure the UPS daemon via ''upsd.conf'' | ||
<pre> | <pre> | ||
− | LISTEN 127.0.0.1 3493 | + | LISTEN 127.0.0.1 3493 |
− | LISTEN 192.168.1.108 3493 | + | LISTEN 192.168.1.108 3493 |
</pre> | </pre> | ||
** and add users to ''upsd.users'' | ** and add users to ''upsd.users'' | ||
<pre> | <pre> | ||
+ | [admin] | ||
+ | password = xxxxx | ||
+ | actions = SET FSD | ||
+ | instcmds = ALL | ||
+ | upsmon master | ||
+ | [ups] | ||
+ | password = xxxxx | ||
+ | upsmon slave | ||
</pre> | </pre> |
Revision as of 02:24, 20 May 2018
- install nut
sudo apt-get install nut
- configure nut, link with instructions https://wiki.ipfire.org/addons/nut/detailed
- configuration files in /etc/nut
- configure UPS type in nut.conf
MODE=standalone
- configure ups.conf
[tripplite-1500lcd] driver = usbhid-ups port = auto desc = "The black UPS in the rack upstairs"
- configure the UPS daemon via upsd.conf
LISTEN 127.0.0.1 3493 LISTEN 192.168.1.108 3493
- and add users to upsd.users
[admin] password = xxxxx actions = SET FSD instcmds = ALL upsmon master [ups] password = xxxxx upsmon slave