From Hentschel
(→Design Rev 2.0) |
(→Design Rev 2.0) |
||
Line 42: | Line 42: | ||
== Design Rev 2.0 == | == Design Rev 2.0 == | ||
* create fireplace controller with raspberry pi zero + OLED display that fits into single gang box with decora faceplate | * create fireplace controller with raspberry pi zero + OLED display that fits into single gang box with decora faceplate | ||
− | * the Oled display which will fit [https://learn.adafruit.com/096-mini-color-oled at this link][[File:lcds___displays_684_LRG.jpg|400px|thumb|left]]<br clear=both> | + | * the Oled display which will fit [https://learn.adafruit.com/096-mini-color-oled at this link] |
+ | [[File:lcds___displays_684_LRG.jpg|400px|thumb|left]]<br clear=both> | ||
* Rudimentary Python driver: [https://gist.github.com/HentschelT/5fa11f13832cca6e7408886f4e89d05e Gist at Github] | * Rudimentary Python driver: [https://gist.github.com/HentschelT/5fa11f13832cca6e7408886f4e89d05e Gist at Github] | ||
− | * the 3d-printable decora cover: [http://www.thingiverse.com/thing:1643841/#files at thingiverse] [[File:decoracover.jpg|400px|thumb|left]]<br clear=both> | + | * the 3d-printable decora cover: [http://www.thingiverse.com/thing:1643841/#files at thingiverse] |
+ | [[File:decoracover.jpg|400px|thumb|left]]<br clear=both> | ||
* Need buttons | * Need buttons | ||
Revision as of 16:52, 28 March 2017
Basics
- getting nodes http://thomas:xxxxx@isy.home.hentschel.net/rest/nodes/
- get thermostat node http://thomas:xxxxx@isy.home.hentschel.net/rest/nodes/14%2023%20AC%201
- setting temp to 70F via REST http://thomas:xxxxx@isy.home.hentschel.net/rest/nodes/14%2023%20AC%201/set/CLISPH/140
Fan control off:
<node flag='0'> <address>14 23 AC 4</address> <name>Thermostat - Fan Control</name> ... <property id='ST' value='0' formatted='Off' uom='%/on/off'/> </node>
Fan control on
<node flag='0'> <address>14 23 AC 4</address> <name>Thermostat - Fan Control</name> ... <property id='ST' value='255' formatted='On' uom='%/on/off'/> </node>
Thermostat manuals
Design
- Use insteon 2450 to switch fireplace low-voltage control
- Control Insteon 2450 via Thermostat - Heat Control (insteon address: 14 23 AC 3) via ISY program
- Rewire house heater to use the 2nd stage heater control on the thermostat
- Sense fire place heater via 2450 input
- Engage house heater fan via ISY program
Design Rev 2.0
- create fireplace controller with raspberry pi zero + OLED display that fits into single gang box with decora faceplate
- the Oled display which will fit at this link
- Rudimentary Python driver: Gist at Github
- the 3d-printable decora cover: at thingiverse
- Need buttons
How many buttons to control?
- ESCAPE/BACK
- UP
- DOWN
- SELECT/ENTER
?