From Hentschel
Jump to: navigation, search
(reset switch)
Line 28: Line 28:
  
 
=== reset switch ===
 
=== reset switch ===
* BBB: pin 67 <-> GND
+
* BBB:  
 +
  pin 67 <-> GND

Revision as of 00:15, 2 December 2019

Lam modified

  • use 14400 as baud rate for FTDI; on Mac:
  screen /dev/cu.usbserial-FTFO858O 115200
  • default login is debian:
  debian:temppwd
  • P9 header is off by one, counting from 1. There is a extra GND row in position 3-4 ?

Time

  • change time zone: sudo timedatectl set-timezone America/Los_Angeles
  • install ntp: sudo apt-get install ntp

Networking

  • the ethernet interfaces don't appear to work. Using Edimax wifi
  • set manually
 sudo ifconfig eth0 192.168.1.16 netmask 255.255.255.0
  • permanent in in /etc/network/interfaces
allow-hotplug wlan0
iface wlan0 inet static
   address 192.168.1.16
   netmask 255.255.255.252
   network 192.168.1.0
   gateway 192.168.1.1
   dns-nameserver 192.168.1.2
   dns-search home.hentschel.net
   wpa-ssid hentschel
   wpa-psk bb78bbaa6a8425255774e5d49b51b4038d55c0c3e493334abbecec31c27096b6

reset switch

  • BBB:
 pin 67 <-> GND