From Hentschel
(→initial z wave install) |
|||
(3 intermediate revisions by the same user not shown) | |||
Line 4: | Line 4: | ||
feature:install openhab-transport-serial | feature:install openhab-transport-serial | ||
* check the serial port for the z wave stick, typically /dev/ttyACM0 or thereabouts | * check the serial port for the z wave stick, typically /dev/ttyACM0 or thereabouts | ||
− | ** make sure serial port is | + | ** make sure ''openhab" user is added to "dialout" and "tty" groups (should be automatic) |
+ | * use habmin to discovery the z-wave stick | ||
+ | ** add the USB serial port used | ||
+ | * for locks, make sure no existing keys exist in the lock. | ||
+ | * in habmin, hit discovery on the z-wave bridge device (upper left corner), and hit the locks "A" button shortly after | ||
+ | ** the lock device should be discovered in the inbox | ||
+ | * check the discovered device, it may take a little bit for it to be completely discovered | ||
+ | ** in the ''attributes'' section, the security check mark should be checked green | ||
+ | * if not checked, use habmin to unpair device, hit the ''A'' button again to complete un-pair. | ||
+ | * discover the lock again, check that ''using security'' is checked | ||
+ | |||
+ | * make sure the pantry outlet switch (z-wave device) is plugged in, it serves as a bridge to the door lock, since that cannot be reached from the Z-Wave serial stick directly | ||
+ | |||
+ | lots of good info on [http://www.cd-jackson.com/index.php/openhab/5-zwave-debugging-openhab chris jackson's site] |
Latest revision as of 13:50, 20 May 2021
initial z wave install
- drop z-wave jar file into addons
- in the OH shell ("ssh -p 8101 openhab@localhost"), install the serial transport
feature:install openhab-transport-serial
- check the serial port for the z wave stick, typically /dev/ttyACM0 or thereabouts
- make sure openhab" user is added to "dialout" and "tty" groups (should be automatic)
- use habmin to discovery the z-wave stick
- add the USB serial port used
- for locks, make sure no existing keys exist in the lock.
- in habmin, hit discovery on the z-wave bridge device (upper left corner), and hit the locks "A" button shortly after
- the lock device should be discovered in the inbox
- check the discovered device, it may take a little bit for it to be completely discovered
- in the attributes section, the security check mark should be checked green
- if not checked, use habmin to unpair device, hit the A button again to complete un-pair.
- discover the lock again, check that using security is checked
- make sure the pantry outlet switch (z-wave device) is plugged in, it serves as a bridge to the door lock, since that cannot be reached from the Z-Wave serial stick directly
lots of good info on chris jackson's site