From Hentschel
(→Stratux) |
|||
Line 3: | Line 3: | ||
* Stratux build page [http://stratux.me this link] | * Stratux build page [http://stratux.me this link] | ||
* Status info at http://stratux/getStatus | * Status info at http://stratux/getStatus | ||
+ | |||
+ | ==== /etc/network/interfaces ==== | ||
+ | <pre> | ||
+ | auto lo | ||
+ | iface lo inet loopback | ||
+ | |||
+ | allow-hotplug eth0 | ||
+ | iface eth0 inet dhcp | ||
+ | |||
+ | allow-hotplug wlan0 | ||
+ | iface wlan0 inet static | ||
+ | address 192.168.10.1 | ||
+ | netmask 255.255.255.0 | ||
+ | post-up /usr/sbin/stratux-wifi.sh | ||
+ | wireless-power off | ||
+ | |||
+ | allow-hotplug wlan1 | ||
+ | iface wlan1 inet static | ||
+ | wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf | ||
+ | address 192.168.1.98 | ||
+ | netmask 255.255.255.0 | ||
+ | gateway 192.168.1.1 | ||
+ | |||
+ | # iface name_of_WPA_Config inet dhcp | ||
+ | # iface name_of_other_WPA_Config inet dhcp | ||
+ | ## End of interfaces | ||
+ | </pre> | ||
=== PiAware === | === PiAware === | ||
* build instructions [https://flightaware.com/adsb/piaware/install at this link] | * build instructions [https://flightaware.com/adsb/piaware/install at this link] |
Revision as of 02:35, 19 May 2019
Stratux
- Stratux build page this link
- Status info at http://stratux/getStatus
/etc/network/interfaces
auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet static address 192.168.10.1 netmask 255.255.255.0 post-up /usr/sbin/stratux-wifi.sh wireless-power off allow-hotplug wlan1 iface wlan1 inet static wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf address 192.168.1.98 netmask 255.255.255.0 gateway 192.168.1.1 # iface name_of_WPA_Config inet dhcp # iface name_of_other_WPA_Config inet dhcp ## End of interfaces
PiAware
- build instructions at this link