From Hentschel
(→Design Rev 2.0) |
(→Design Rev 2.0) |
||
Line 54: | Line 54: | ||
*; 2 mm ( 0.20 cm) radius on the corners. | *; 2 mm ( 0.20 cm) radius on the corners. | ||
[[File:decoracover.jpg|400px|thumb|left]]<br clear=both> | [[File:decoracover.jpg|400px|thumb|left]]<br clear=both> | ||
− | * | + | * Buttons are [https://www.amazon.com/20pcs-Momentary-Tactile-Button-Switch/dp/B008DGA9UY/ref=pd_day0_60_2?_encoding=UTF8&pd_rd_i=B008DGA9UY&pd_rd_r=GNV66H9DW90V434T9PAN&pd_rd_w=j6naj&pd_rd_wg=jsniR&psc=1&refRID=GNV66H9DW90V434T9PAN at amazon]. |
− | + | [[:File:tactile push button square cap.jpg]]<br clear=both> | |
=== Design questions === | === Design questions === |
Revision as of 17:38, 28 March 2017
Basics
- getting nodes http://thomas:xxxxx@isy.home.hentschel.net/rest/nodes/
- get thermostat node http://thomas:xxxxx@isy.home.hentschel.net/rest/nodes/14%2023%20AC%201
- setting temp to 70F via REST http://thomas:xxxxx@isy.home.hentschel.net/rest/nodes/14%2023%20AC%201/set/CLISPH/140
Fan control off:
<node flag='0'> <address>14 23 AC 4</address> <name>Thermostat - Fan Control</name> ... <property id='ST' value='0' formatted='Off' uom='%/on/off'/> </node>
Fan control on
<node flag='0'> <address>14 23 AC 4</address> <name>Thermostat - Fan Control</name> ... <property id='ST' value='255' formatted='On' uom='%/on/off'/> </node>
Thermostat manuals
Design
- Use insteon 2450 to switch fireplace low-voltage control
- Control Insteon 2450 via Thermostat - Heat Control (insteon address: 14 23 AC 3) via ISY program
- Rewire house heater to use the 2nd stage heater control on the thermostat
- Sense fire place heater via 2450 input
- Engage house heater fan via ISY program
Design Rev 2.0
- create fireplace controller with raspberry pi zero + OLED display that fits into single gang box with decora faceplate
- Inspired from here:
- the Oled display which will fit into decora blank at this link
- Rudimentary bit-banging Python driver: Gist at Github
- Native driver package at Github
- the 3d-printable decora cover: at thingiverse
- Dimensions:
- Device 6.66 x 3.30 cm
- Hole in trim plate 6.68 x 3.32 cm
- 2 mm ( 0.20 cm) radius on the corners.
- Buttons are at amazon.
File:tactile push button square cap.jpg
Design questions
How many buttons to control?
- ESCAPE/BACK
- UP
- DOWN
- SELECT/ENTER
- recessed reset button
?