From Hentschel
Jump to: navigation, search
(Stratux)
Line 3: Line 3:
 
* Stratux build page [http://stratux.me this link]
 
* Stratux build page [http://stratux.me this link]
 
* Status info at http://stratux/getStatus
 
* Status info at http://stratux/getStatus
 +
 +
==== /etc/network/interfaces ====
 +
<pre>
 +
auto lo
 +
iface lo inet loopback
 +
 +
allow-hotplug eth0
 +
iface eth0 inet dhcp
 +
 +
allow-hotplug wlan0
 +
iface wlan0 inet static
 +
  address 192.168.10.1
 +
  netmask 255.255.255.0
 +
  post-up /usr/sbin/stratux-wifi.sh
 +
  wireless-power off
 +
 +
allow-hotplug wlan1
 +
iface wlan1 inet static
 +
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
 +
    address 192.168.1.98
 +
    netmask 255.255.255.0
 +
    gateway 192.168.1.1
 +
 +
# iface name_of_WPA_Config inet dhcp
 +
# iface name_of_other_WPA_Config inet dhcp
 +
## End of interfaces
 +
</pre>
  
 
=== PiAware ===
 
=== PiAware ===
 
* build instructions [https://flightaware.com/adsb/piaware/install at this link]
 
* build instructions [https://flightaware.com/adsb/piaware/install at this link]

Revision as of 02:35, 19 May 2019

Stratux

/etc/network/interfaces

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

allow-hotplug wlan0
iface wlan0 inet static
  address 192.168.10.1
  netmask 255.255.255.0
  post-up /usr/sbin/stratux-wifi.sh
  wireless-power off

allow-hotplug wlan1
iface wlan1 inet static
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
    address 192.168.1.98
    netmask 255.255.255.0
    gateway 192.168.1.1

# iface name_of_WPA_Config inet dhcp
# iface name_of_other_WPA_Config inet dhcp
## End of interfaces

PiAware