From Hentschel
/* Stratux */
* Stratux build page [http://stratux.me this link]
* Status info at http://stratux/getStatus
==== /etc/network/interfaces ====
<pre>
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet static
address 192.168.10.1
netmask 255.255.255.0
post-up /usr/sbin/stratux-wifi.sh
wireless-power off
allow-hotplug wlan1
iface wlan1 inet static
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
address 192.168.1.98
netmask 255.255.255.0
gateway 192.168.1.1
# iface name_of_WPA_Config inet dhcp
# iface name_of_other_WPA_Config inet dhcp
## End of interfaces
</pre>
=== PiAware ===
* build instructions [https://flightaware.com/adsb/piaware/install at this link]