From Hentschel
Revision as of 22:45, 21 March 2017 by Thomas (Talk | contribs)

Jump to: navigation, search

Setting up VPN via SSHD

from this link

  • enable
    • PermitTunnel yes
  • disable
    • AllowTcpForwarding yes

Important: Both sides need to run as root to create the tunnel device. Thus, 'ssh -w 0:0 root@www.hentschel.net' must run as root on the client side too. <quote>

   +---------------+            OpenSSH 4.3           +---------------+
   |   hentschel   | tun0 -- Tunnel Interface -- tun0 |   zm.home     |
   |  Has a tunnel | <------------------------------->|  Has a tunnel |  
   |  and ethernet | 10.0.0.100            10.0.0.200 |  and ethernet |
   +-------+-------+     point to point connection    +-------+-------+
      eth0 |                 creates a bridge                 | eth0  
198.57.187.185 |            that plugs machine B               | 192.168.0.100
  port 22  |                  into network A                  |          
 forwarded |                                                  |
   here    |                                                  |
   +-------+-------+          +-~-~-~-~-~-~-~-+       +-------+-------+ 
   |   Network A   |          |               |       |   Network B   |
   |  10.0.0.1/24  | 1.2.3.4  |  The Internet |       | 192.168.0.1/24|
   |  Has internet |<-------->|               |<----->|  Has internet |
   |  NAT gateway  | Routable |               |       |  NAT gateway  |
   +---------------+ Address  +-~-~-~-~-~-~-~-+       +---------------+

</quote>