From Hentschel
| Line 15: | Line 15: | ||
+-------+-------+ point to point connection +-------+-------+ | +-------+-------+ point to point connection +-------+-------+ | ||
eth0 | creates a bridge | eth0 | eth0 | creates a bridge | eth0 | ||
| − | 198.57.187.185 | | + | 198.57.187.185 | that plugs machine B | 192.168.1.100 |
Routable | into network A | | Routable | into network A | | ||
address | | | address | | | ||
Revision as of 21:57, 21 March 2017
Setting up VPN via SSHD
from this link
- enable
- PermitTunnel yes
- disable
- AllowTcpForwarding yes
Important: Both sides need to run as root to create the tunnel device. Thus, 'ssh -w 0:0 root@www.hentschel.net' must run as root on the client side too. <quote>
+---------------+ OpenSSH 4.3 +---------------+
| hentschel | tun0 -- Tunnel Interface -- tun0 | zm.home |
| Has a tunnel | <------------------------------->| Has a tunnel |
| and ethernet | 10.0.0.100 10.0.0.200 | and ethernet |
+-------+-------+ point to point connection +-------+-------+
eth0 | creates a bridge | eth0
198.57.187.185 | that plugs machine B | 192.168.1.100
Routable | into network A |
address | |
here | |
+-------+-------+ +-------+-------+
| Network A | | Network B |
| The Internet | | 192.168.1.1/24|
| Has internet | | Has internet |
| | | NAT gateway |
+---------------+ +---------------+
</quote>